Object Title

Centrefire self-loading pistol - Makarov Model M

Centrefire self-loading pistol - Makarov Model M


made 1960

Object Number



Gifted with the Pattern Room from the Ministry of Defence, August 2005

Physical Description

The Model M is the East German copy of the Makarov PM and is a medium-size pistol with a straight blowback action and is of all steel construction with a frame-fixed barrel. In a blowback designs such as this, the only force holding the slide closed is that of the recoil spring wrapped around the barrel; as a consequence upon firing the barrel and slide do not have to unlock. Blowback designs are simple and more accurate than designs using a recoiling, tilting, or articulated barrel, but they are limited practically by the need to have weight in the slide. The 9×18mm cartridge (Russian designation: 57-N-181S) around which this pistol was designed provides enough energy to action the blowback design. The PM is heavy for its size, largely because of the heavy slide which is needed to provide greater inertia to delay the opening of the breech until internal pressures have fallen to a safe level. The Makarov design is widely regarded as particularly well balanced. The slide also has a full- length textured anti-glare strip on the top
In concept the Makarov PM and its East German copy, the Model M, is a very simple pistol, the designer Makarov and his team, during development, drastically simplified the construction of the pistol, improving its reliability and reducing the number of parts to an astonishing 27, not including the magazine.
The chrome-lined, 4-groove, right hand twist, 9.27mm (true calibre) barrel is pressed and pinned to the frame through a precision-machined ring. There is a 7kg rated recoil spring that wraps around the barrel which also acts as the spring guide.
The front sight is integrally machined into the slide. The fixed rear sight is dovetailed into the slide. The extractor is of an external spring-loaded type. The breech face is deeply recessed in order to improve extraction and ejection reliability. The stamped sheet steel slide-lock lever has an internal tail serving the additional purpose of an ejector. The one-piece, plain wraparound black bakelite grip is reinforced with steel inserts and has a detent inside the screw bushing preventing unscrewing during firing.
The sheet-metal mainspring housed inside the grip operates the hammer, the trigger and the disconnector, and its lower end is the heel and spring of the magazine catch. The sear spring also serves a dual purpose by operating the slide-lock lever.
The Model M has a free-floating triangular shaped firing pin, with no firing pin spring or firing pin block.


Cast, Forged





Serial Number G8511


9 mm

Inscriptions and Marks

Quality control stamp
K100 within an oblong
on the left side of the frame above the trigger
inspectors stamp
a cursive 'a' surrounded by 4 dots
on the tail of the left side of the frame
Proof mark
circle within a square
on the left side of the frame above the trigger and repeated above on the slide